AMX NI-2000 Edit User Menu, Access Rights Menu, NetLinx Security with a Terminal Connection

NetLinx Security with a Terminal Connection

The Edit User Menu options are described in the following table:

Edit User Menu

Command		Description
1)	Change User Password	This selection prompts you to enter the new password (twice) for the
		user. Once the new password is entered, the user must use the new
		password from that point forward.
2)	Change Inherits From Group	This selection will display the current group the user is assigned to
		(if any). It will then display a list of current groups and prompts you
		to select the new group.
3)	Add Directory Association	This selection will display any current Directory Associations
		assigned to the user, and then will prompt you for a path for the new
		Directory Association. Refer to the Security tab - User Directory
		Associations page section on page 65 for details.
4)	Delete Directory Association	This selection will display any current Directory Associations
		assigned to the user, and then will prompt you to select the
		Directory Association you want to delete.
5)	List Directory Associations	This selection will display any current Directory Associations
		assigned to the user.
6)	Change Access Rights	This selection will display access the Access Rights Menu for the
		user, which allows you to set the rights assigned to the user.
7)	Display User Record Contents	This selection will display the group the user is assigned to and the
		current Access Rights assigned to the user.

Access Rights Menu

The Access Rights Menu is accessed whenever you select Change Access Rights from the Edit User Menu, or Change Access Rights from the Edit Group Menu. The Access Rights Menu is displayed as follows:

Select to change current access right
1)	Terminal (RS232) Access	Disabled
2)	Admin Change Password Access	Disabled
3)	FTP Access	Disabled
4)	HTTP Access	Enabled
5)	Telnet Access	Enabled
6)	Security Configuration Access	Enabled
Or <ENTER> to return to previous menu
Set	Rights ->

The selection listed will display the current access rights. Each selection simply toggles the access right selected. Press <ENTER> to exit the menu and return to the previous menu.

The Access Rights Menu is described in the following table:

98 NetLinx Integrated Controllers