AMX NI-2000, NI-3000, NI-4000 instruction manual Sendcommand IR1,XCHM, Sendcommand IR1, XCH

Programming

IR/Serial Send_Commands (Cont.)

XCHM

Changes the IR output pattern for the XCH command.

Syntax:

SEND_COMMAND <DEV>,'XCHM-<Mode>'

Variable:

Mode = 0-4

Example:

SEND_COMMAND IR_1,'XCHM 3'

Sets the IR_1 device's extended channel command to mode 3.

Mode 0 Example (default): [x] [x] <x> <enter>

SEND_COMMAND IR_1, 'XCH 3'

Transmits the IR code as 3-enter.

SEND_COMMAND IR_1, 'XCH 34'

Transmits the IR code as 3-4-enter.

SEND_COMMAND IR_1, 'XCH 343'

Transmits the IR code as 3-4-3-enter.

Mode 1 Example: <x> <x> <x> <enter>

SEND_COMMAND IR_1, 'XCH 3'

Transmits the IR code as 0-0-3-enter.

SEND_COMMAND IR_1, 'XCH 34'

Transmits the IR code as 0-3-4-enter.

SEND_COMMAND IR_1, 'XCH 343'

Transmits the IR code as 3-4-3-enter.

Mode 2 Example: <x> <x> <x>

SEND_COMMAND IR_1, 'XCH 3'

Transmits the IR code as 0-0-3.

SEND_COMMAND IR_1, 'XCH 34'

Transmits the IR code as 0-3-4.

SEND_COMMAND IR_1, 'XCH 343'

Transmits the IR code as 3-4-3.

Mode 3 Example: [[100][100]…] <x> <x>

SEND_COMMAND IR_1, 'XCH 3'

Transmits the IR code as 0-3.

SEND_COMMAND IR_1, 'XCH 34'

Transmits the IR code as 3-4.

SEND_COMMAND IR_1, 'XCH 343'

Transmits the IR code as 100-100-100-4-3.

Mode 4:

Mode 4 sends the same sequences as the CH command. Only use Mode 4 with channels 0-199.

122 NetLinx Integrated Controllers