AMX NI-4000 Set Ip Dps, SET Time, Set Url Dps, Show Device DPS, Show LOG ALL, Show Notify

Programming

Program Port Commands (Cont.)

SET IP <D:P:S>	Prompts you to enter a Host Name, Type (DHCP or Fixed), IP address,
	Subnet Mask, and Gateway IP address. Enter Y (yes) to approve/store the
	information in the Master Card. Entering N (no) cancels the operation.
SET TIME	Prompts you to enter the new time for the Master Card.
	When the time is set on the Master Card, the new time will be reflected on
	all devices in the system that have clocks (i.e. touch panels). By the same
	token, if you set the time on any system device, the new time will be
	reflected on the system’s Master, and all connected devices.
	This will not update clocks on devices connected to another Master (in
	Master-to-Master systems)
SET URL <D:P:S>	Prompts you to enter the URL address and port number. Enter Y (yes) to
	approve/store the new addresses in the Master Card. Entering N (no)
	cancels the operation.
SHOW DEVICE <D:P:S>	Displays a list of all devices present on the bus.
SHOW LOG	Displays the log of messages stored in the Master's memory. The Master
	logs all internal messages and keeps the most recent messages. The log
	contains:
	• Entries starting with first specified or most recent.
	• Date, Day, and Time message was logged.
	• Which object originated the message.
	• The text of the message:
	SHOW LOG [start] [end]
	SHOW LOG ALL
	• If start is not entered, the most recent will be first.
	• If end is not entered, the last 20 messages will be shown.
	• If ALL is entered, all stored messages will be shown, starting with the
	most recent.
SHOW NOTIFY	Displays a list of devices that other systems have requested input from
	and the types of information needed. Note that the local system number is
	1061.
SHOW REMOTE	Displays a list of the devices this system requires input from and the types
	of information needed. When a NetLinx Master connects to another
	NetLinx Master, the newly connecting system has a device that the local
	system desires input from; the new system is told what information is
	desired from what device. Note the local system number is 1062.
SHOW ROUTE	Displays information about how this NetLinx Master is connected to other
	NetLinx Masters.
SHOW SYSTEM	Provides a list of all devices in all systems currently on-line. The system’s
	lists are either directly connected to this Master (i.e. 1 hop away), or are
	referenced in the DEFINE_DEVICE section of the NetLinx program. You
	may provide the desired system number as a parameter to display only
	that system's information (e.g. SHOW SYSTEM 2001). The systems listed
	are shown in numerical order.
TCP LIST	Lists all active TCP/IP connections.
TIME	Displays the current time on the Master Card.
URL LIST <D:P:S>	Displays the list of URL addresses programmed in the Master Card.

112 NetLinx Integrated Controllers