AMX NI-3000, NI-4000, NI-2000 instruction manual Using your NetLinx Master to control the G4 panel

NetLinx Security and Web Server

18.The first tab displayed within your open browser window is WebControl.

Using your NetLinx Master to control the G4 panel

Refer to the specific panel instruction manual for detailed information on configuring and enabling WebControl.

Once the Master’s IP Address has been set through NetLinx Studio (version 2.2 or higher):

1.Launch your web browser.

In order to fully utilize the SSL encryption, your web browser should incorporate an encryption feature. This encryption level is displayed as a Cipher strength.

2.Enter the IP Address of the target NetLinx Master (example: 198.198.99.99) into your web browser’s Address field.

3.Enter a valid user name and password into the fields within the Enter Network Password dialog.

4.Click OK to enter the information and proceed to the Master’s WebControl tab.

5.Press the Enter key on your keyboard to begin the communication process between the target Master and your PC.

If a Security Alert window appears on your computer screen, refer to the specific NetLinx Master Instruction Manual for detailed information regarding this popup window. These steps are based on a Master with proper security and SSL encryption enabled.

6.This tab (FIG. 35) displays links to both G3 web panel pages downloaded to the target Master and G4 panels running the latest G4 Web Control feature.

G3 panel

G4 panel

FIG. 59 WebControl Tab (populated with panels)

Application tabs

Compatible devices field

Communication compression options

7.Click on the G4 panel name link associated with the target panel. A secondary web browser window appears on the screen (FIG. 60).

90 NetLinx Integrated Controllers