PRELIMINARY
TECHNICAL
DATA
PRELIMINARY
TECHNICAL
DATA
This information applies to a product under development. Its characteristics and specifications are subject to change with-
out notice. Analog Devices assumes no obligation regarding future manufacturing unless otherwise agreed to in writing. 43REV. PrA
For current information contact Analog Devices at (781) 461-3881 ADSP-2192October 2000
TIMING SPECIFICATIONSIDD Supply Current Dynamic
(Internal) @ 160 MIPS TBD mA
IDD-IDLE Supply Current (Idle) VDDINT = 2.5V TBD mA
CIN Input Capacitance6,7 fIN=1 MHz,
TCASE=25°C,
VIN=2.5V
TBD pF
1Applies to output and bidirectional pins.
2Applies to input.
3Applies to input pins with internal pull-ups.
4Applies to three-statable pins.
5Applies to three-statable pins with internal pull-ups.
6Applies to all signal pins.
7Guaranteed, but not tested.
ABSOLUTE MAXIMUM RATINGSParameter Min Max Units
Digital Power Supply, External (VDDEXT)–0.3 6.0 V
Analog Power Supply (VCC) –0.3 6.0 V
Input Current (except supply pins) ±10.0 mA
Analog Input Voltage (Signal Pins) –0.3 VCC +0.3 V
Digital Input Voltage (Signal Pins) –0.3 VDD +0.3 V
Ambient Temperature (Operating) 0 +70 °C
Storage Temperature –65 +150 °C
ESD SENSITIVITYCAUTION: ESD (electrostatic discharge) sensitive device. Electrostatic charges as high
as 4000V readily accumulate on the human body and test equipment and can discharge
without detection. Although the ADSP-2192 features proprietary ESD protection cir-
cuitry, permanent damage may occur on devices subjected to high energy electrostatic
discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of funct ionality.
ELECTRICAL CHARACTERISTICS (CONTINUED)Parameter Test Conditions Min Max Units