
3If you need to remove one or more existing DRAM DIMMs to make room for new ones, remove them now by following the illustration below.
IMPORTANT Do not touch the DIMM’s connectors. Handle the DIMM only by the edges.
Ejector (Your slot may have one or two ejectors.)
DRAM DIMM (Your DIMM’s shape and components may vary.)
(Toward front of computer | ) |
While holding the DIMM along its side edges, press down on the ejector(s) as shown. The DIMM will be released from its slot, and you can then pull the DIMM straight up and out of the slot.
Connectors
DRAM slot (1 of 12)
114 | Chapter 8 |