4Align the DRAM DIMMs in the DRAM slots as pictured.
IMPORTANT Do not touch the DIMM’s connectors. Handle the DIMM only by the edges.
Ejector (Your slot may have one or two ejectors. They should be pushed outward and down to be in the “open” position, as shown.)
DRAM DIMM (Your DIMM’s shape and components may vary.)
Notches
Ribs (inside slot) |
|
(Toward front of computer | ) |
Connectors
DRAM slot (1 of 12)
The DRAM DIMM is designed to fit into the slot only one way. Be sure to align the notches in the DIMM with the small ribs inside the slot. With the ejector(s) in the “open” position (as shown), push down on the DIMM until it snaps into place. The ejector(s) will automatically “close.”
Installing PCI Expansion Cards and Additional Memory | 115 |
