AT&T 1080 Remove all entries from the directory

Directory

Remove all entries from the directory

1. Press [DIR] to begin working with the directory.

2. Press [ENTER] to select VIEW ENTRIES.

3. Press [ ] or [ ] until the screen shows END OF

LIST.

4. Press [REMOVE]. The screen display include

REMOVE ALL?

5. Press [REMOVE] again within three seconds to

confirm the command and remove all directory

entries. The screen will display ALL REMOVED!

NOTE: Once the entries are removed from the

directory, they cannot be restored.

To save an entry to a one-touch key

1. Find the entry for the desired number by

following the directions under Review

directory entries on page 46.

2. Press [ENTER] then [ ] or [ ] until you see

COPY TO 1-TOUCH.

3. Press [ENTER] to begin to save the number.

4. Press the one-touch button for the location

where you want to save the number.

-OR-

Press [LOWER], then press the one-touch

button.

5. The screen automatically returns to the

directory record just reviewed.

6. Press [DIR] to exit.

NOTE: If the desired one-touch key location

was empty, the screen will display SAVED! If there

is a telephone number in it, the screen will display

REPLACE SPD? You can replace the current entry

by pressing [ENTER], or keep the current entry by

pressing [ ] or [ ] until you see NO REPLACE?

Press [ENTER], then choose another one-touch

key location.