10:01AM 11/23 EXT 11 INTERCOM TO PAGE

10:01AM 11/23 EXT 11 INTERCOM TO 12

Intercom operation

Intercom

Make an intercom call with the speakerphone or headset

With the handset in the telephone base:

1.If One-touch preference is set to INTERCOM, skip to step 2.

-OR-

If One-touch preference is set to TELEPHONE, press [INTERCOM]. The phone will automatically activate the intercom call in the mode (headset or speakerphone) you programmed (see AUTOMATIC MODE on page 39 of the installation guide).

2.Press the one-touch button. The screen will display INTERCOM TO xx, with XX being the destination extension.

If the destination extension is idle or set to Do Not Disturb, you will hear long beeps. If the other extension is busy, you will hear a busy signal.

NOTE: The intercom call is automatically can- celed if you do not press a one-touch button with- in 10 seconds.

27

Page 4
Image 4
AT&T 1080 manual Make an intercom call with the speakerphone or headset