DTAD SETUP
ON
CALL SCREENING
DTAD SETUP
ON
DTAD INTERCEPT
Answering system operation
DTAD setup
Call screening
Choose whether incoming messages can be heard over the speaker when they are being recorded. If you turn call screening on, you will hear the incoming private message on your telephone when a call comes in.
1.Press [ENTER].
2.Press [
] or [ ] until you see DTAD SETUP. Press [ENTER].
3.Press [
] or [ ] until you see CALL SCREENING.
4.Press [
] or [
] to choose ON or OFF.
5.To move to the next feature, press [ ].
To exit setup, press and hold [ENTER].
NOTE: If the Do Not Disturb (DND) feature is active (page 15), the call screening feature will be disabled automatically.
DTAD intercept
Choose whether private incoming messages can be intercepted by other phones. Someone at the 1080 phone which is recording the message can always intercept the call. If DTAD intercept is on when a caller leaves a message, someone on another system telephone sharing the same line can answer the call by pressing the corresponding line key.
1.Press [ENTER].
2.Press [
] or [ ] until you see DTAD SETUP. Press [ENTER].
3.Press [
] or [ ] until you see DTAD INTERCEPT.
4.Press [
] or [
] to choose ON or OFF.
5.To move to MAIN MENU, press [ ].
To exit setup, press and hold [ENTER].
69
