05:10PM 08/09 01:56 5550100

DTAD FEATURE

RECORD CALL

RECORD CALL 00:30

RECORDING STOP

Answering system operation

To record and play two-way conversations

During an outside call, you can record the conversation as a private message in the answering system memory. It is saved, played back and deleted exactly like private incoming messages.

To record a two-way conversation

1.While you are on an outside call, press [DTAD].

2.The screen will display RECORD CALL. Press [ENTER]. The elapsed time (in seconds) is shown on the screen when recording. Two-way conversation shorter than three seconds will not be recorded.

3.The recording will be ended if you disconnect the call.

-OR-

Press [ENTER] to select STOP. Then press [DTAD] to exit the recording mode and continue with the conversation.

NOTE: This telephone does not have warning beeps to inform the other party that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding record- ing a telephone call, you should start the recording process and then inform the other party that you are recording the call.

To play back a two-way conversation

Two-way conversations are stored as private messages. See Private message playback on page 73 for instructions on playback and deletion.

76

Page 53
Image 53
AT&T 1080 manual To record a two-way conversation, To play back a two-way conversation