DTAD SETUP
ON
ANSWER STATUS
DTAD SETUP
ON
ANSWER STATUS
Answering system operation
DTAD setup
See DTAD setup in Feature Setup on pages 57- 62 in the installation guide to set up the DTAD function.
To turn the private message answering system on or off
The answering function of this phone is programmable. See ANSWER STATUS on page 57 of the installation guide for programming instructions.
NOTE: If the ANSWER STATUS setting is OFF, the answering system of the auto attendant telephone can still record central messages and system extension messages.
Answer status
Follow the steps below so that the 1080 phone will record private messages (not the SYS EXT messages meant for the associated 1070 and 1040 phones). See page 65 for more information.
1.Press [ENTER].
2.Press [
] or [ ] until you see DTAD SETUP. Press [ENTER]. The screen will display ANSWER STATUS.
3.Press [
] or [
] to choose ON to turn the answering system on, or OFF to turn the answering system off.
4.To move to the next feature, press [
].
To exit setup, press and hold [ENTER].
NOTE: If the ANSWER STATUS setting is OFF, the 1080 phone can still record central messages and extension messages.
65
