AudioControl VERSION 6.2 manual Prefix, Modified SIP Gateway Parameters for Release Description

	CPE SIP Products
Parameter	Description
Outbound IP Routing Table	Modification: PREFIX_DestSRD added.
[Prefix]	This ini file table parameter configures the Outbound IP Routing table
	for routing Tel-to-IP and IP-to-IP calls. The format of this parameter is
	as follows:
	[PREFIX]
	FORMAT PREFIX_Index = PREFIX_DestinationPrefix,
	PREFIX_DestAddress, PREFIX_SourcePrefix, PREFIX_ProfileId,
	PREFIX_MeteringCode, PREFIX_DestPort, PREFIX_SrcIPGroupID,
	PREFIX_DestHostPrefix, PREFIX_DestIPGroupID,
	PREFIX_SrcHostPrefix, PREFIX_TransportType,
	PREFIX_SrcTrunkGroupID, PREFIX_DestSRD;
	[\PREFIX]

1.12.1.2 SIP Gateway Parameters

The table below describes the SIP Gateway parameters from the previous release that have been modified in Release 6.2.

Table 1-12: Modified SIP Gateway Parameters for Release 6.2

Parameter	Description
Automatic Dialing Table	Modification: HotLineToneDuration parameter added (MP-1xx,
[TargetOfChannel]	Mediant 600, Mediant 1000, Mediant 1000 MSBG).
	[TargetOfChannel]
	FORMAT TargetOfChannel_Index = TargetOfChannel_Destination,
	TargetOfChannel_Type, TargetOfChannel_HotLineToneDuration,
	TargetOfChannel_Module, TargetOfChannel_Port;
	[\TargetOfChannel]
	Where:
	HotLineToneDuration = defines the timeout per port (channel) for
	automatic dialing when the Hotline feature is enabled. If the phone
	(connected to the specific port) is off-hooked and no digit is pressed
	for this user-defined duration (timeout), the device automatically
	initiates a call to the user-defined destination phone number. This
	parameter has a valid value range of 0 to 60 seconds, with default
	as 16.
Tone Index Table	Modification: ToneIndex_DestinationPrefix parameter added (MP-
[ToneIndex]	1xx, Mediant 600, Mediant 800 MSBG, Mediant 1000 MSBG, Mediant
	1000).
	[ToneIndex]
	FORMAT ToneIndex_Index = ToneIndex_FXSPort_First,
	ToneIndex_FXSPort_Last, ToneIndex_SourcePrefix,
	ToneIndex_DestinationPrefix, ToneIndex_PriorityIndex;
	[\ToneIndex]
	Where:
	DestinationPrefix = destination (called) number (or prefix) for
	associating a distinctive ringing pattern and call waiting tone for IP-
	to-Tel calls (FXS interfaces).

SIP Release Notes 104 Document #: LTRT-26901