SIP Release Notes |
| 1. What's New in Release 6.2 |
| |
38. MWI for BRI Interfaces: |
|
|
| |
|
|
|
|
|
|
| Product |
| |
|
|
| ||
|
|
|
|
|
| Mediant 600 |
| Mediant 1000 |
|
|
|
|
|
|
| Mediant 800 MSBG |
| Mediant 1000 MSBG |
|
|
|
|
|
|
| Mediant 2000 |
|
|
|
|
|
|
|
|
| Mediant |
| Mediant 3000 |
|
|
|
|
|
|
| Mediant |
| Mediant 3000 |
|
|
|
|
|
|
|
| Management Protocol |
| |
|
|
|
|
|
Web
INI
SNMP
EMS
CLI
This feature provides support for MWI on BRI phones connected to the device and using the Euro ISDN BRI variant. When this feature is activated and a voice mail message is recorded to the mail box of a BRI extension, the softswitch sends a notification to the device. In turn, the device notifies the BRI extension and a red light flashes on the BRI extension’s phone. Once the voice message is retrieved, the MWI light on the BRI extension turns off.
This feature is configured by the new option, “ETSI” (8) of the existing VoiceMailInterface parameter and enabled by the existing EnableMWI parameter.
39.Keypad Protocol for DTMF Digits According to ETS 300 122-1:
| Product | |
| ||
|
|
|
Mediant 600 |
| Mediant 1000 |
|
|
|
Mediant 800 MSBG |
| Mediant 1000 MSBG |
|
|
|
Mediant 2000 |
|
|
|
|
|
Mediant |
| Mediant 3000 |
|
|
|
Mediant |
| Mediant 3000 |
|
|
|
| Management Protocol | |
|
|
|
Web
INI
SNMP
EMS
CLI
This feature provides support for ISDN Information messages received from BRI phones using Information messages. During a call, if the BRI phone user presses digits (for example, for interactive voice response/IVR applications such as retrieving voice mail messages), ISDN Information messages received by the device for each digit are sent in the voice channel to the IP network as DTMF signals. The method by which the device “injects” these DTMF signals into the IP is defined by the existing parameter, TxDTMFOption.
Version 6.2 | 47 | December 2010 |
