AudioControl VERSION 6.2 manual Manipulation of Redirect Reason for Tel-to IP Calls

CPE SIP Products

44.Manipulation of Redirect Reason for Tel-to IP Calls:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

This feature provides support for configuring a default redirect reason for Tel-to-IP calls. This is configured by the new parameter, Tel2IPDefaultRedirectReason.

The device includes this default redirect reason in the SIP History-Info header of the outgoing INVITE if the received Q931 ISDN Setup message does not include a redirect reason or includes only an “unknown” reason. If a redirect reason exists in the received Setup message, the new parameter is ignored and the device sends the INVITE message with the reason according to the received Setup message. If the parameter is not configured, the outgoing INVITE is sent with the redirect reason (if none or “unknown” then no reason) as received in the Setup message.

45.UC Namespace for MLPP Calls:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

This feature provides support for configuring a new default namespace, “UC” for Multi- Level Precedence & Preemption (MLPP) calls received from the ISDN side and destined for the Application server. This is configured by setting the existing parameter MLPPDefaultNamespace to the new option, “UC” (5). The namespace value is not present in the Precedence IE of the PRI Setup message. Therefore, this value is used in the Resource-Priority header of the outgoing SIP INVITE request.

SIP Release Notes 50 Document #: LTRT-26901