CPE SIP Products

1.1Supported Hardware Platforms

This section describes the supported hardware platforms in Release 6.2

1.1.1New Hardware Platforms

This section describes the new hardware platforms introduced in Release 6.2.

1.1.1.1MediaPack 1xx

No new hardware platforms.

1.1.1.2Mediant 600

No new hardware platforms.

1.1.1.3Mediant 800 MSBG

The Mediant 800 MSBG supports the following new hardware platforms in Release 6.2: Optional WAN Interfaces:

Symmetric High-Speed Digital Subscriber Line (SHDSL): Single SHDSL port with the following specifications:

Four SHDSL WAN ports housed on a single R-J45 connector

Conforms to ITU G.991.2 Annexes A, B, E, F and G SHDSL

Up to 5,696 Kbps over a single wire pair

Up to 22,784 Kbps over four wire pairs bonding, according to SHDSL.bis (ITU G.991.2 Annexes F, G)

EFM and ATM support

Wetting current support on the CPE side, according to G991.2

Supports both Central Office (CO) and CPE (wetting current on CO - excluded)

TC-PAM 16/32 Line Code

T1 WAN DSU/CSU:

IP over High-level Data Link Control (HDLC) and Point-to-Point Protocol (PPP) encapsulations

PPP password authentication protocol (PAP) and challenge-handshake authentication protocol (CHAP) authentication

Multiple IP interfaces on the T1 WAN interface

E1/T1 copper wire line

SIP Release Notes

10

Document #: LTRT-26901

Page 10
Image 10
AudioControl VERSION 6.2 manual Supported Hardware Platforms, New Hardware Platforms