AudioControl VERSION 6.2 manual Increased Characters for Request-URI Host Name per IP Group

SIP Release Notes 1. What's New in Release 6.2

12.Increased Characters for Request-URI Host Name per IP Group:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

The maximum number of characters has been increased from 49 to 100 for defining the SIP Request-URI host name used in INVITE and REGISTER messages sent to an IP Group, or the host name in the From header of INVITE messages received from the IP Group. This host name is defined using the SIP Group Name parameter (IPGroup_SIPGroupName) in the IP Group table (IPGroup parameter).

13.Destination SRD in Tel-to-IP Routing Table:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

This feature provides support for defining an SRD as the IP destination for Tel-to-IP routing rules in the Outbound IP Routing table (Prefix parameter). Therefore, any one of the following IP destinations can be configured in this table:

•IP address or FQDN (existing support).

•IP Group - the call is routed to the Proxy Set (IP address) or SRD associated with the IP Group (existing support).

•SRD - the call is routed as follows (new support):

♦Proxy Set associated with the SRD.

♦If a Proxy Set is not defined for the SRD, then the call is sent to:

Media/RTP (voice): Media Realm (media port and media IP interface) associated with SRD.

SIP signaling: SIP Interface (SIP port and control IP interface) associated with SRD.

Version 6.2 25 December 2010