AudioControl VERSION 6.2 manual Increase in Characters for Endpoint Phone Number

CPE SIP Products

7.Increase in Characters for Endpoint Phone Number:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

The maximum number of characters that can be defined for an endpoint phone number has been increased from 25 to 50. The phone numbers are configured using the TrunkGroup parameter (Endpoint Phone Number table for MP-1xx and Trunk Group table for digital devices).

8.Forwarding IP-to-Tel Calls to Alternative SIP Request-URI upon Busy Trunk:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

This feature enhances the existing Forward On Busy Trunk Destination feature (configured using the ForwardOnBusyTrunkDest parameter), which until now supported the configuration of only an IP address for call redirection. This feature now allows the redirect destination to be configured as a SIP Request-URI user name and host part (i.e., user@host), or host name (i.e., IP address). For example, the below configuration forwards IP-to-Tel calls to destination user “112” at host IP address 10.13.4.12, port 5060, using transport protocol TCP, if Trunk Group ID 2 is unavailable:

ForwardOnBusyTrunkDest 1 = 2, 112@10.13.4.12:5060;transport=tcp;

When configured with user@host, the original destination number is replaced by the user part.

SIP Release Notes 30 Document #: LTRT-26901