CPE SIP Products
1.10.3 CLI New Features
The device supports the following new
1.Main CLI Configuration Modes:
| Product | |
| ||
|
|
|
Mediant 600 |
| Mediant 1000 |
|
|
|
Mediant 800 MSBG |
| Mediant 1000 MSBG |
|
|
|
Mediant 2000 |
|
|
|
|
|
Mediant |
| Mediant 3000 |
|
|
|
Mediant |
| Mediant 3000 |
|
|
|
| Management Protocol | |
|
|
|
Web
INI
SNMP
EMS
CLI
This feature provides support for three main CLI configuration modes in which the device can be configured. These include VoIP, system, and data. To enter one of these modes, the following commands must be run:
•configure voip (or conf v) – accesses the VoIP configuration mode
•configure system (or conf s) – accesses the System configuration mode
•configure data (or conf d) – accesses the Data configuration mode
2.CLI show Command:
| Product | |
| ||
|
|
|
Mediant 600 |
| Mediant 1000 |
|
|
|
Mediant 800 MSBG |
| Mediant 1000 MSBG |
|
|
|
Mediant 2000 |
|
|
|
|
|
Mediant |
| Mediant 3000 |
|
|
|
Mediant |
| Mediant 3000 |
|
|
|
| Management Protocol | |
|
|
|
Web
INI
SNMP
EMS
CLI
This feature provides enhanced functioning of the CLI show command for displaying the status of the device according to the three main CLI configuration modes - VoIP, system, and data.
To view the relevant status, the following commands must be run:
•show voip <command> - displays VoIP status according to the available <command> command (for an explanation, run show voip ?)
•show system <command> - displays system status according to the available <command> command (for an explanation, run show system ?)
•show data <command> - displays data status according to the available <command> command (for an explanation, run show data ?)
Note: The show commands can be accessed from any configuration mode, by using the do command, for example, do show voip <command>.
SIP Release Notes | 80 | Document #: |
