AudioControl VERSION 6.2 manual SIP Release Notes Whats New in Release

SIP Release Notes 1. What's New in Release 6.2

42.Redirect Number Overwritten by Destination Number for IP-to-Tel Calls:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

This feature allows the device to overwrite the redirect number with the destination number from the received SIP INVITE message in the outgoing ISDN call. This is achieved by assigning an IP Profile (IPProfile parameter) defined with the CopyDest2RedirectNumber parameter set to 1, to the IP-to-Tel Routing table (PSTNPrefix parameter). Even if there is no SIP Diversion or History header in the incoming INVITE message, the outgoing Q.931 Setup message will contain a redirect number.

43.Replacing Calling Number with Redirect Number in Incoming ISDN-to-IP Call:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

This feature allows the device to replace the calling number with the redirect number in ISDN-to-IP calls. When such a replacement occurs, the calling name is deleted and left blank. The outgoing INVITE message does not include the redirect number that was used to replace the calling number. The replacement is done only if a redirect number is present in the incoming call. This feature is enabled using the new parameter, ReplaceCallingWithRedirectNumber.

Version 6.2 49 December 2010