AudioControl VERSION 6.2 manual Distinctive Ringing per FXS Based on Destination Number

SIP Release Notes 1. What's New in Release 6.2

Notes:

•The Hotline duration can be set for all ports using the existing, “global” parameter, HotLineToneDuration.

•This feature is applicable only to FXS and FXO interfaces.

5.Distinctive Ringing per FXS Based on Destination Number:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

This feature supports distinctive ringing patterns and call waiting tones based on destination (called) number (or prefix) for IP-to-Tel calls (FXS interfaces). This is in addition to the existing support based on calling number. For example, if multiple destination numbers are used to route incoming SIP INVITE requests to a specific FXS port, a different ringing pattern can be configured per destination number. This feature is configured using the existing ToneIndex parameter.

6.Channel Select Mode for Ringing Hunt Group:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

This feature offers a new channel select method–Ring to Hunt Group (9)–for allocating IP-to-Tel calls to FXS ports (channels) pertaining to a specific Hunt Group. This method routes calls to all the FXS ports pertaining to the Hunt Group. Therefore, when an IP-to-Tel call is received by the device for a specific Hunt Group, all telephones connected to the FXS ports belonging to the Hunt Group start ringing. The call is received by whichever telephone answers the call first (after which the other phones stop ringing).

The new Ring to Hunt Group channel select option is supported by the “global” ChannelSelectMode parameter as well as by the ChannelSelectMode parameter for the Trunk Group Settings table (TrunkGroupSettings parameter).

Version 6.2 29 December 2010