AudioControl VERSION 6.2 manual Mediant 800 Msbg

SIP Release Notes 1. What's New in Release 6.2

1.1.2.3Mediant 800 MSBG

This release supports the following existing hardware platforms:

Analog telephony interfaces, offering only FXS or only FXO interfaces, or a combination thereof. For a list of available hardware configurations and models, refer to Table 1-1.

Optional, analog Lifeline on FXS Port 1, maintaining PSTN connectivity upon power failure. For the combined FXS/FXO configuration, one Lifeline is available; for the 12- FXS configuration, up to three Lifelines are available.

One set of ISDN Basic Rate Interface (BRI) interfaces, providing four RJ-45 BRI S/T ports (supporting up to 8 voice channels) for connecting ISDN terminal equipment such as ISDN telephones. Each BRI port can be configured either as termination equipment/user side (TE) or network termination/network side (NT). Up to eight TE devices can be connected per BRI S/T port, by using an ISDN S-bus that provides eight ISDN ports.

Optional, Open Solutions Network (OSN) server platform for hosting third-party applications such as IP PBX, based on the following:

•CPU: Intel™ Atom 1.6 GHz processor (Intel Atom N270)

•Memory: 1 GB (or 2 GB for devices with 12 FXO ports)

•Hard disk drive (HDD): SATA with minimum of 20 GB

•OSN ports (on rear panel) includes the following:

♦Three USB ports (Standard-A type) for connecting computer peripherals (e.g., mouse and keyboard)

♦15-pin DB-type VGA port for connecting a monitor

•OSN LEDs (on front panel) for hard disk drive (HDD) and link activity

•Operating System – Microsoft Windows and Linux distributions (for certified support, please contact AudioCodes)

Single WAN port (10/100/1000Base-T copper).

Twelve Ethernet LAN ports, supporting half- and full-duplex modes, auto-negotiation, and straight or crossover cable detection:

•Up to four RJ-45 10/100/1000Base-T (Gigabit) ports

•Eight RJ-45 10/100Base-TX (Fast Ethernet) ports

Power-over-Ethernet (PoE) supported on all LAN ports, complying with IEEE 802.3af- 2003. The maximum wattage per port is 15.4W, providing a total wattage of 120W for all ports.

Front-panel LEDs providing operating status of FXS/FXO interfaces, LAN interfaces, WAN interface, PoE, OSN, and power supply.

Three-prong AC supply entry for AC power (standard electrical outlet) - single, universal 90-260 VAC.

Protective earthing screws for grounding.

Desktop or 19-inch rack mounting (using external mounting brackets).

Version 6.2 13 December 2010