AudioControl VERSION 6.2 manual Data-Router New Features, Dual WAN over T1 Interface Ports

CPE SIP Products

1.7Data-Router New Features

The device supports the following new data-router features:

1.Dual WAN over T1 Interface Ports:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

The device now supports two physical WAN T1 links, thereby allowing a bandwidth of up to 3 Mbps. The T1 WAN connection is through a Dual T1 line interface (according to ANSI T1.403-1999). The device uses its Dual T1 WAN Data Service Unit/Channel Service Unit (DSU/CSU) port interface to transmit and receive data using IP over Point-to-Point Protocol (PPP) framing (up to two separate links), IP over High-Level Data Link Control (HDLC) framing (up to two separate links), or bundling both physical links into a single logical link using IP over Multilink Point-to-Point Protocol (MLP) framing (RFC 1717).

2.BER Test for T1 WAN Interface:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

The device now supports bit error rate (BER) testing on the T1 WAN interface for the far-end transmission link. The BER Test is done by generating and detecting both pseudorandom and repeating bit patterns. The test is enabled using the ber-testCLI command.

SIP Release Notes 72 Document #: LTRT-26901