CPE SIP Products
1.9Infrastructure New Features
The device supports the following new infrastructure features:
1.Enhanced Syslog Message Management using Facility Levels:
| Product | |
| ||
|
|
|
Mediant 600 |
| Mediant 1000 |
|
|
|
Mediant 800 MSBG |
| Mediant 1000 MSBG |
|
|
|
Mediant 2000 |
|
|
|
|
|
Mediant |
| Mediant 3000 |
|
|
|
Mediant |
| Mediant 3000 |
|
|
|
| Management Protocol | |
|
|
|
Web
INI
SNMP
EMS
CLI
This feature supports the configuration of the Facility level (0 through 7) for the device’s Syslog messages, according to RFC 3164. This feature is useful, for example, to customers who collect the device’s and other equipments’ Syslog messages at one single server. The device’s Syslog messages can easily be identified and distinguished from other Syslog messages by its Facility level. Therefore, in addition to filtering Syslog messages according to IP address, the messages can be filtered according to Facility level.
The Facility level is configured by the new parameter, SyslogFacility, which provides the following levels:
•16 - local use 0 (local0) - default
•17 - local use 1 (local1)
•18 - local use 2 (local2)
•19 - local use 3 (local3)
•20 - local use 4 (local4)
•21 - local use 5 (local5)
•22 - local use 6 (local6)
•23 - local use 7 (local7)
2.Power over Ethernet (PoE) Port Status:
| Product | |
| ||
|
|
|
Mediant 600 |
| Mediant 1000 |
|
|
|
Mediant 800 MSBG |
| Mediant 1000 MSBG |
|
|
|
Mediant 2000 |
|
|
|
|
|
Mediant |
| Mediant 3000 |
|
|
|
Mediant |
| Mediant 3000 |
|
|
|
| Management Protocol | |
|
|
|
Web
INI
SNMP
EMS
CLI
This feature provides Power over Ethernet (PoE) status indication when an IP Phone is connected to one of the device’s LAN ports. This status is provided by the CLI GetPOEPortStatusCmd command, which when run, displays the status.
SIP Release Notes | 76 | Document #: |
