AudioControl VERSION 6.2 manual Management and Provisioning New Parameters

SIP Release Notes 1. What's New in Release 6.2

1.11.6 Management and Provisioning New Parameters

The table below describes the new management and provisioning parameter for Release 6.2.

Notes: These parameters are applicable to the Gateway and SBC applications.

Table 1-10: New Management and Provisioning Parameter for Release 6.2

Parameter	Description
[SNMPEngineIDString]-	Defines the SNMP engine ID for SNMPv3/SNMPv2 agents. This is
	used for authenticating a user attempting to access the agent on the
	device.
	The ID can be a string of up to 36 characters. The default value is
	00:00:00:00:00:00:00:00:00:00:00:00 (12 Hex octets characters). The
	provided key must be set with 12 Hex values delimited by a colon (":")
	in the format xx:xx:...:xx. For example,
	00:11:22:33:44:55:66:77:88:99:aa:bb
	Notes:
	For this parameter to take effect, a device reset is required.
	Before setting this parameter, all SNMPv3 users must be deleted;
	otherwise, the parameter setting is ignored.
	If the supplied key does not pass validation of the 12 Hex values
	input or it is set with the default value, the engine ID is generated
	according to RFC 3411.

Version 6.2 101 December 2010