AudioControl VERSION 6.2 Modified Parameters, SIP Parameters, SIP General Parameters, Description

CPE SIP Products

1.12Modified Parameters

This section describes parameters from the previous release that have been modified in Release 6.2.

1.12.1 SIP Parameters

This section describes SIP parameters from the previous release that have been modified in Release 6.2.

1.12.1.1 SIP General Parameters

The table below describes the SIP general parameters from the previous release that have been modified in Release 6.2.

Table 1-11: Modified SIP General Parameters for Release 6.2

Parameter			Description
Coders Group Table	Modifications:
[CodersGroup0]		WB-RTA (Mediant 3000)
[CodersGroup1]		G.722 (Mediant 800 MSBG) AMR-WB (Mediant 800 MSBG)
[CodersGroup2]
		Transparent ptime (Mediant 600, Mediant 1000, Mediant 1000
[CodersGroup3]
		MSBG, Mediant 2000)
[CodersGroup4]
	The format of this parameter is as follows:
	[ CodersGroup0]
	FORMAT CodersGroup0_Index = CodersGroup0_Name,
	CodersGroup0_pTime, CodersGroup0_rate,
	CodersGroup0_PayloadType, CodersGroup0_Sce;
	[ \CodersGroup0 ]
		Coder Name	Packetization	Rate (kbps)	Payload	Silence
			Time (msec)		Type	Suppression
		WB-MS-RTA	20 ms	29000	114	n/a
		[ms_rta_wb]
		G.722	20 (default),	64 (default)	Always 9	N/A
		[g722]	40, 60, 80, 100,
			120
		AMR-WB	20 (default)	6.6 [0],	Dynamic (0-	Disable [0]
		[Amr-WB]		8.85 [1],	127)	Enable [1]
				12.65 [2],
				14.25 [3],
				15.85 [4],
				18.25 [5],
				19.85 [6],
				23.05 [7],
				23.85 [8]
				(default)
		Transparent	10, 20	Always 64	Dynamic (0-	Disable [0]
		[Transparent]	(default), 40,		127)	Enable [1]
			60, 80, 100,
			120

SIP Release Notes 102 Document #: LTRT-26901