AudioControl VERSION 6.2 manual CPE SIP Products, Parameter, Description, StaticRouteTable

		CPE SIP Products
Parameter		Description
[StaticRouteTable]	This ini file table parameter configures the IP Routing table for
	defining static IP routing rules. These rules can be associated
	with IP interfaces defined in the Multiple Interface table. The
	routing decision is thus based on the source subnet/VLAN. If not
	associated with an IP interface, the static IP rule is based on
	destination IP address.
	The format of this table is as follows:
	[ StaticRouteTable ]
	FORMAT StaticRouteTable_Index =
	StaticRouteTable_InterfaceName, StaticRouteTable_Destination,
	StaticRouteTable_PrefixLength, StaticRouteTable_Gateway,
	StaticRouteTable_Description;
	[ \StaticRouteTable ]
	Where:
	InterfaceName = IP network interface associated with this
	routing rule (index of the network interface as defined in the
	Multiple Interface table)
	Destination = IP address of the destination host/network
	PrefixLength = Subnet mask of the destination host/network
	Gateway = IP address of the router (next hop) to which the
	packets are sent if their destination matches the rules in the
	adjacent columns
	Description = Arbitrary description of this rule
Syslog Facility Number	Facility level (0 through 7) for the device’s Syslog messages,
[SyslogFacility]	according to RFC 3164. This allows the user to identify Syslog
	messages generated by the device.
	This is useful, for example, if you collect the device’s and other
	equipments’ Syslog messages, at one single server. The
	device’s Syslog messages can easily be identified and
	distinguished from other Syslog messages by its Facility level.
	Therefore, in addition to filtering Syslog messages according to
	IP address, the messages can be filtered according to Facility
	level.
	16 - local use 0	(local0) - default
	17 - local use 1	(local1)
	18 - local use 2	(local2)
	19 - local use 3	(local3)
	20 - local use 4	(local4)
	21 - local use 5	(local5)
	22 - local use 6	(local6)
	23 - local use 7	(local7)

SIP Release Notes 100 Document #: LTRT-26901