CPE SIP Products

Configurable channel-select mode per trunk group.

Various number manipulation rules for IP-to-Tel and Tel-to-IP, called and calling numbers.

Option to configure ISDN Transfer Capability per trunk.

Transfer of User-to-User Information Element (UUIE) between SIP and PRI. ISDN Transfer using TBCT / RLT / ECT.

QSIG messages tunneling over SIP according to ECMA-355(ISO/IEC 22535). ISDN PRI messages tunneling over SIP messages according to RFC 3372 - SIP-T.

Interworking of Hold/Retrieve supplementary services from QSIG/EuroISDN to SIP and vice versa.

QSIG and EURO ISDN Deflection (Rerouting), interworking of Call Rerouting Facility to SIP 302 response in both IP-to-Tel and Tel-to IP directions.

QSIG MWI Notifications and QSIG MWI Interrogation.

QSIG Single Step Transfer from QSIG to SIP, and vice versa. QSIG Path Replacement from SIP to QSIG.

QSIG BRI Suspend/Resume. Euro-ISDN MWI

BRI Call Forwarding (supported by the softswitch that does the call forward operation; the device simply provides the softswitch the information (by DTMF) about the forward numbers.

Comply with DoD UCR 2008 Change 1 specifications, including Multi-Level Precedence & Preemption (MLPP) using NI-2. (Not applicable to Mediant 800 MSBG.)

Calling Party Category interworking between PRI and SIP according to <draft-mahy- iptel-cpc-05>.

E911 Generic Information IE (according to Telcordia GR-2968-CORE) from SIP to NI- 2. (Not applicable to Mediant 800 MSBG.)

SIP Release Notes

128

Document #: LTRT-26901

Page 128
Image 128
AudioControl VERSION 6.2 manual SIP Release Notes 128 Document # LTRT-26901