AudioControl VERSION 6.2 manual Modified SIP SAS Parameters for Release Description

SIP Release Notes 1. What's New in Release 6.2

1.12.1.3 SIP SAS Parameters

The table below describes the SIP SAS parameters from the previous release that have been modified in Release 6.2.

Table 1-13: Modified SIP SAS Parameters for Release 6.2

Parameter	Description
SAS Survivability Mode	Modification: Option [4] Use IP-to-IP Routing Table added (all
[SASSurvivabilityMode]	products).
	Determines the Survivability mode used by the SAS application.
	[0] Standard = Incoming INVITE and REGISTER requests are
	forwarded to the defined Proxy list of SASProxySet in Normal mode
	and handled by the SAS application in Emergency mode (default).
	[1] Always Emergency = The SAS application does not use Keep-
	Alive messages towards the SASProxySet, instead it always
	operates in Emergency mode (as if no Proxy in the SASProxySet is
	available).
	[2] Ignore Register = Use regular SAS Normal/Emergency logic
	(same as option [0]), but when in Normal mode incoming
	REGISTER requests are ignored.
	[3] Auto-answer REGISTER = When in Normal mode, the device
	responds to received REGISTER requests by sending a SIP 200
	OK (instead of relaying the registration requests to a Proxy), and
	enters the registrations in its SAS database.
	[4] Use Routing Table only in Normal mode = The device uses the
	IP-to-IP Routing table to route IP-to-IP SAS calls only when in SAS
	Normal mode (and is unavailable when SAS is in Emergency
	mode).

Version 6.2 111 December 2010