AudioControl VERSION 6.2 manual Additional Vxml Script Attributes for Invoking Vxml Scripts

SIP Release Notes 1. What's New in Release 6.2

31.Additional VXML Script Attributes for Invoking VXML Scripts:

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

This feature provides support for the following additional VXML session variables and events:

•session.connection.local.uri

•session.connection.remote.uri

•session.connection.protocol.name

•session.connection.protocol.version (version is ‘2’ instead of ‘2.0’)

•session.connection.redirect (redirect reason and screening information contains ‘_’ instead of whitespace between words)

•session.connection.aai

32.Activating VXML Script on Receipt of Regular INVITE:

	Applicable Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410
	Management Protocol

Web

INI

SNMP

EMS

CLI

This feature provides support for activating a Voice XML (VXML) script using the VXMLID parameter in the Request-URI user part only, upon receipt of a regular INVITE message. For example:

Request-URI = <VXMLID>http://mydomain.com/myscript.cgi@host;

Up till now, VXML was invoked on the receipt of SIP Request-URIs such as:

<VXMLID>@host;voicexml= http://...

This feature is supported for IP-to-Tel and Tel-to-IP calls. For specified dialed phone numbers, the user part can be manipulated by adding a VXML script path. For example, upon receipt of the INVITE request, INVITE sip:100@myhost the device can be configured to manipulate (using the IP to Tel Manipulation table) the Request- URI user part to voicexml=http://myhost.com/script.cgi@myhost.

Version 6.2 43 December 2010