AudioControl VERSION 6.2 manual 3 SS7 Constraints

CPE SIP Products

3.In STM-1 and OC3 configurations, path alarms do not show the correct state if the higher level is not synchronized. For example, if there is no LOS on both PSTN Port A and Port B, the path level displays "No Alarm".

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410

3.3.3SS7 Constraints

This release includes the following known SDH constraints:

1.SS7 capacity limitations:

•Up to 2 signaling nodes can be configured per device.

•Up to 2 Alias Point Codes can be configured per signaling node, but only 1 signaling node can be configured with Alias Point Codes.

•Up to 64 signaling links can be configured per device.

•Up to 32 link-sets can be configured per signaling node.

•Up to 8 links can be configured per link-set.

•Up to 30 route-sets can be configured per signaling node.

•Up to 4 link-sets can be configured per route-set (routes per route-set).

	Product
MP-11x		MP-124
Mediant 600		Mediant 1000
Mediant 800 MSBG		Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310		Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410		Mediant 3000 HA/TP-8410

2.SS7 MTP3 Signaling Node (SN) Redundancy Limitations:

•Up to two blades can be configured as Shared Point Code.

•Blade redundancy parameters cannot be changed on-the-fly (except for SS7MTP3RdcyTblSyncInterval).

•The Add & Delete commands can be performed on the SN-Blade Table Configuration when the SN is set to Offline.

•ini file configurations after reset are not relayed to remote devices.

•SN operations (InService/Start/Stop) are local to the device they are performed on.

•On-the-fly configurations that are performed on one device are passed only to the remote devices that established a TCP connection with that device. (For this reason, redundancy SN-Blade table configurations are not passed between the new device that is configured and the other device.)

•SS7 operations that are performed on one device are passed only to the remote devices that have an InService x-link to that device.

SIP Release Notes 156 Document #: LTRT-26901