AudioControl VERSION 6.2 manual VQMonEOCRValTHR, RTCPInterval, DisableRTCPRandomize, RTCPXREscIP

SIP Release Notes		1. What's New in Release 6.2
Parameter		Description
R-Value Delay Threshold	Voice quality monitoring - end of call low quality alert threshold. if set
[VQMonEOCRValTHR]	to -1 (default), no alerts are issued.
RTCP Packet Interval	Defines the time interval (in msec) between adjacent RTCP reports.
[RTCPInterval]	The interval range is 0 to 65,535. The default interval is 5,000.
Disable RTCP Interval	Controls whether RTCP report intervals are randomized or whether
Randomization	each report interval accords exactly to the parameter RTCPInterval.
[DisableRTCPRandomize]	[0]	Disable = Randomize (default)
	[1]	Enable = No Randomize
Esc Transport Type	Determines the transport layer used for outgoing SIP dialogs initiated
[RTCPXRESCTransportTy	by the device to the RTCP XR Collection Server.
pe]	[-1] Not Configured (default)
	[0]	UDP
	[1]	TCP
	[2]	TLS
	Note: When set to ‘Not Configured’, the value of the parameter
	SIPTransportType is used.
RTCP XR Collection Server	IP address of the Event State Compositor (ESC). The device sends
[RTCPXREscIP]	RTCP XR reports to this server, using SIP PUBLISH messages. The
	address can be configured as a numerical IP address or as a domain
	name.
RTCP XR Report Mode	Determines whether RTCP XR reports are sent to the Event State
[RTCPXRReportMode]	Compositor (ESC), and if so, defines the interval in which they are
	sent.
	[0]	Disable = RTCP XR reports are not sent to the ESC (default).
	[1]	End Call = RTCP XR reports are sent to the ESC at the end of
	each call.
	[2]	End Call & Periodic = RTCP XR reports are sent to the ESC at
	the end of each call and periodically according to the parameter
	RTCPInterval.

Version 6.2 91 December 2010