CPE SIP Products
1.12.2 SBC Parameters
The table below describes SBC parameters from the previous release that have been modified in Release 6.2.
Table 1-14: Modified SBC Parameter for Release 6.2
Parameter | Description |
|
|
IP Group Table | Modification: Option [2] for IPGroup_Type (Mediant 800 MSBG, |
[IPGroup] | Mediant 1000 MSBG, Mediant 3000); Option [2] for |
| IPGroup_EnableSurvivability. |
| [IPGroup] |
| FORMAT IPGroup_Index = IPGroup_Type, IPGroup_Description, |
| IPGroup_ProxySetId, IPGroup_SIPGroupName, |
| IPGroup_ContactUser, IPGroup_EnableSurvivability, |
| IPGroup_ServingIPGroup, IPGroup_SipReRoutingMode, |
| IPGroup_AlwaysUseRouteTable, IPGroup_RoutingMode, |
| IPGroup_SRD, IPGroup_MediaRealm, IPGroup_ClassifyByProxySet, |
| IPGroup_ProfileId, IPGroup_MaxNumOfRegUsers, |
| IPGroup_InboundManSet, IPGroup_OutboundManSet; |
| [\IPGroup] |
| Where: |
| IPGroup_Type: |
| [0] SERVER |
| [1] USER |
| [2] GATEWAY |
| IPGroup_EnableSurvivability: |
| [0] Disable (default) |
| [1] Enable if Necessary |
| [2] Always Enable = Survivability mode is always enabled. The |
| communication with the Serving IP Group (e.g., |
| always considered as failed. The device uses its database for |
| routing calls between the clients (e.g., IP phones) of the USER- |
| type IP Group. |
Admission Control Table | Modification: Rate and MaxBurst parameters added (Mediant 800 |
[SBCAdmissionControl] | MSBG, Mediant 1000 MSBG). |
| [SBCAdmissionControl] |
| FORMAT SBCAdmissionControl_Index = |
| SBCAdmissionControl_LimitType, SBCAdmissionControl_IPGroupID, |
| SBCAdmissionControl_SRDID, SBCAdmissionControl_RequestType, |
| SBCAdmissionControl_RequestDirection, |
| SBCAdmissionControl_Limit, SBCAdmissionControl_LimitPerUser, |
| SBCAdmissionControl_Rate, SBCAdmissionControl_MaxBurst; |
| [\SBCAdmissionControl] |
| Where: |
| Rate = rate at which tokens are added to the bucket (i.e., token |
| rate). One token is added to the bucket every 1000/Rate |
| milliseconds. In other words, this is the rate of dialog setups per |
| second, or unlimited if set to 0 (default). |
| MaxBurst = Maximum tokens that can fill the bucket. At any given |
| time, the bucket cannot contain more than this amount of tokens. In |
| other words, this is the maximum burst size for the dialog setup |
| rate, or unlimited if set to 0 (default). |
SIP Release Notes | 112 | Document #: |
