Service Mode

Change password

This item is password protected.

Highlight 'change password' with the control stick and press ENTER.

The current password is displayed. The new password must consist of 4 digits between 0 and 9. Push the control stick to the left or to the right to select the digits to be changed. Use the numeric keys to enter the new digits.

Press ENTER to save the new password. Before saving the new password, a confirmation screen will be displayed.

Press EXIT to return to the Service menu without saving the new password.

When the displayed password is correct, press ENTER to save. If not correct, press EXIT to cancel the saving.

SERVICE MODE

IDENTIFICATION

COPY A BLOCK

DELTE A BLOCK

DELETE ALL BLOCKS

CHANGE PASSWORD

CHANGE LANGUAGE

RUN TIME

SET TO MIDPOSITION

CONVERGENCE MID

DYNAMIC ASTIGMATISM

MORE...

PASSWORD

Enter new password :

0 0 0 0

Use and to select, and reprogram

with numeric keys.

CHANGE PASSWORD

Password will be reprogrammed as xxxx

<ENTER> to confirm <EXIT> to cancel

Change Language

The 'Change Language' function offers the possibility to change the language of the screen menus to :

-English

-Spanish

-French

-German

therefore, pusj the control stick forward or backward to highlight 'Change language' and pressENTER to select the language menu.

Push the control stick forward or backward to select the desired language and press ENTER to change the language.

Run time

Highlight 'run time' with the control stick and press ENTER to display the amount of time the projector has played since its first start up at the factory.

Note : all projectors leave the factory after a burn-in period of approximately 100 hours.

Press EXIT to return the service mode menu.

7-4

SERVICE MODE

 

IDENTIFICATION

 

COPY A BLOCK

 

DELTE A BLOCK

 

DELETE ALL BLOCKS

 

CHANGE PASSWORD

 

CHANGE LANGUAGE

 

RUN TIME

 

SET TO MIDPOSITION

 

CONVERGENCE MID

 

DYNAMIC ASTIGMATISM

 

MORE...

 

Select

 

then

LANGUAGE

<EXIT>

ENGLISH

ESPAÑOL

FRANCAIS

DEUTSCH

Select new language

with or then <ENTER> <EXIT> to return.

SERVICE MODE

IDENTIFICATION

COPY A BLOCK

DELTE A BLOCK

DELETE ALL BLOCKS

CHANGE PASSWORD

CHANGE LANGUAGE

RUN TIME

SET TO MIDPOSITION

DYNAMIC

RUN TIME

105 h

5975007 BARCOGRAPHICS 808s 160996

Page 41
Image 41
Barco R9000901, R9000908 owner manual Change password, Change Language, Run time, Barcographics 808s, RUN Time