Random Access Adjustment Mode
Sync Fast/Slow Adjustment
The sync function is used to minimize horizontal jittering or tearing at the top to the displayed image.
Highlight SYNC by pushing the control stick forward or backward and press ENTER to toggle between FAST and SLOW.
Note: SYNC is normally used in the SLOW position. For Video and
ENTER will toggle Sync between FAST and SLOW EXIT will return to the random access selection menu
Peaking
Peaking improves the contours in an projected image.
Highlight PEAKING by pushing the control stick forward or backward and press ENTER to display the peaking menu.
During the creation of new settings for a RGB source the correspond- ing peaking is switched on as default.
For frequencies between :
15 kHz - 45 kHz : Low frequency peaking
45 kHz - 85 kHz : Mid frequency peaking
85 kHz - 110 kHz :High frequency peaking
If another peaking is desired, use the control stick to highlight 'low', 'mid' or 'high' frequency or to switch off the peaking.
PICTURE TUNING | |
COLOR BALANCE | |
SYNC : FAST | |
PEAKING |
|
CLAMP TUNING : normal | |
LINE DOUBLER | |
Select with | or |
<ENTER> to accept | |
<EXIT> to return. | |
PICTURE TUNING |
|
COLOR BALANCE |
|
SYNC : FAST |
|
PEAKING |
|
CLAMP TUNING : normal |
|
LINE DOUBLER |
|
PEAKING |
|
OFF |
|
LOW FREQUENCY | |
MID FREQUENCY | |
HIGH FREQUENCY | |
Select with | or |
then <ENTER> | |
<EXIT> to return. | |
Clamp Tuning
Highlight CLAMP TUNING by pushing the control stick forward or backward and press ENTER to toggle between NORMAL and
RESTORATION.
Select Normal : - for all standard sources and all sources with a backporch > 0.8µs,
-for sources with noise and spikes in the signal. Select Restoration
: - for standard sources with a backporch between 0.4 µs and 0.8 µs,
-for sources with sync separate or sync on Green.
PICTURE TUNING | |
COLOR BALANCE | |
SYNC : FAST | |
PEAKING |
|
CLAMP TUNING : normal | |
LINE DOUBLER :ON | |
Select with | or |
<ENTER> to accept | |
<EXIT> to return. | |
5975007 BARCOGRAPHICS 808S 051196 |
| |
|
