Service Mode
Identification
Highlight 'Identification' with the control stick and press ENTER.
The 'Identification' screen gives information concerning :
-projector address. To change the address of your projector, contact a qualified service technician.
-software version.
-configuration.
possible installations :
*
*
*
*
-baud rate PC : transfer speed for communication with an IBM PC (or compatible) or MAC. The baud rate of the projector must be the same as the baud rate of the connected computer. When there is a difference, contact a qualified service
technician to make the appropriate changes.
-Text ON/OFF
Indicates in operational mode if the bar scale and number indicator will be displayed and if warnings and failures will be displayed. ON : displayed
OFF : not displayed
The status can be changed by pressing the 'TEXT' key once on the RCU.
-Serial no. : indicates the fabrication number of the projector. This number can be useful when calling for technical assistance.
SERVICE MODE |
IDENTIFICATION |
COPY A BLOCK |
DELTE A BLOCK |
DELETE ALL BLOCKS |
CHANGE PASSWORD |
CHANGE LANGUAGE |
RUN TIME |
SET TO MIDPOSITION |
CONVERGENCE MID |
DYNAMIC ASTIGMATISM |
MORE... |
GRAPHICS 808s
Proj. address : 001
Soft. Version : 6.00
Config. : Ceiling
Front
Baudrate PC : 9600
Text : ON
Serial No. : 103589552
Copy a block
The copy a block function copies the settings of a selected block into the active block.
Highlight copy a block with the control stick and press ENTER. ENTER will select the highlighted item.
To copy the settings of a closed block to the block you are working on (active block), use the control stick to select a block.
All existing settings will be overwritten with the new settings.
Press ENTER to copy the selected block. A confirmation screen will be displayed.
If you are certain you wish to copy the contents of the selected block into the active block, press ENTER.
EXIT cancels the copy procedure and returns without copying the block.
SERVICE MODE |
|
|
|
|
|
IDENTIFICATION |
|
|
|
|
|
COPY A BLOCK |
|
|
|
|
|
DELTE A BLOCK |
|
|
|
|
|
DELETE ALL BLOCKS |
|
|
|
| |
CHANGE PASSWORD |
|
|
|
| |
CHANGE LANGUAGE |
|
|
|
| |
RUN TIME |
|
|
|
|
|
SET TO MIDPOSITION |
|
|
|
| |
CONVERGENCE MID |
|
|
|
| |
DYNAMIC ASTIGMATISM |
|
|
|
| |
MORE... |
|
|
|
|
|
|
|
| COPY MODE |
| |
Nr. | Src | Fh | Fv | inp | conf |
1 | 1 | 15.6 50 | video | FC | |
2 | 3 | 31.2 60 | RGB3S | RT | |
3 | - | 15.6 50 | intern | FC | |
4 | 2 | 31.5 50 | RGB3S | FC | |
5 | - | 33.7 60 | intern | FC | |
6 |
|
|
|
|
|
7 |
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
| Active block nr. 1 | |
|
|
|
|
| COPY BLOCK |
All settings
in current block will be overwritten !
<ENTER> to confirm <EXIT> to cancel
| 5975007 BARCOGRAPHICS 808s 160996 | |
|
