Selecting Setup Pattern, Internal # Pattern | Barco R9000908

Random Access Adjustment Mode

Selecting Setup Pattern

If an external source is connected to the projector, this menu will be displayed. Push the control stick forward or backward to highlight the desired setup pattern and then press

ENTER.

Genlocked pattern : internally generated cross hatch pattern, locked on the external source.

Internal # pattern : internally generated cross hatch pattern and locked on internal generated sync signals. (No external source necessary)

ENTER continues to Random Access Adjustment Mode or Internal # Pattern Selection

EXIT returns to Path Selection menu ADJUST returns to Operational mode

If no external source is connected to the projector, the internal cross hatch pattern menu will be displayed.

Note: The menus in this manual are created for an external source, connected to one of the inputs, and the 'Genlocked Pattern' is selected.

Choose a setup pattern
from below :
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
	Source 01
Select with	or
then <ENTER>
<EXIT> to return.

Internal Cross Hatch Pattern

The Internal # pattern menu will be displayed if the internal cross hatch pattern has been selected or if no source is connected to the projector.

The table below lists the 8 fixed factory preset frequencies available. Another 8 blocks are custom programmable.

Push the control stick forward or backward to highlight the desired cross hatch frequency. Use the left and right arrow to scroll to another page. Press ENTER. if the desired block is selected.

kHz/Hz
15.6/50	PAL/SECAM
15.7/60	NTSC
31.2/50	EDTV
31.5/60	IDTV
31.2/50	HDTV EUREKA
31.5/60	HDTV ATV
33.7/60	HDTV HIVISION
15.8/60	EGA 1
21.8/60	EGA 2
61.0/76	VGA 1,2
35.5/87	VGA 4
48.5/60	SUPER VGA 1
44.2/70	SUPER VGA 2
61.0/76	SUPER VGA 3
72.1/67	SUPER VGA 4
89.3/67	SUN 3/260

ENTER continues to the Random Access Adjustment Mode.

EXIT returns to the Setup Pattern Selection menu.

	INTERNAL # PATTERN
kHz / Hz
15.6/50	PAL/SECAM
15.7/60	NTSC
31.2/50	EDTV
31.5/60	IDTV
31.2/50	HDTV EUREKA
31.5/60	HDTV ATV
	Select with	or
	scroll with	or
	<ENTER> to accept
	<EXIT> to return

5975007 BARCOGRAPHICS 808S 051196		6-3

Image 24

Barco R9000908, R9000901 owner manual Selecting Setup Pattern, Internal Cross Hatch Pattern, Internal # Pattern

Contents

Graphics 808s R9000901 R9000908 Barco Projection Systems Date Art. No 051196 R5975007 Barco nv/Projection Systems Noordlaan Kuurne Belgium Table of Contents Service mode Options Safety Instructions On safety On installation On cleaningOn servicing On repacking Location and Function of Controls Getting Access Control panel terminology Local KeypadRCU control panel terminology AC Power mains Cord Connection Power CheckSwitching On/Off Connections Signal Input Connection to the Projector Port No Projector input Press Digit ButtonComp. Video Video1/Comp. Video Start up with full white image Connecting a Composite Video source to port Connecting a S-Video or Video source to portVideo input selection Input selection Connecting a RGB Analog source to port Connecting a RGB Analog source to port 4/5Analog Input Selection RGB input selection Connecting a Component Video source to port 4/5 To select the component video input Connecting a Rcvds 05 switcher to the Barcographics 808s Connecting a VS05 switcher to Barcographics 808sConnecting an IR Remote Receiver to the Barcographics 808s Battery installation in the RCU Controlling How to use your RCU Hardware set up of the projector addressHow to control the projector Using your RCU How to display a projector address? How to program an address into the RCU?Input selection Port No Projector input Press Digit Button Analog Picture Controls Controlling chained projectors Start UP of the Adjustment Mode Adjustment Mode 0000 Wrong Starting-Up the Random Access Adjustment mode Overview Random Access Adjustment mode From next Selecting Setup Pattern Internal Cross Hatch PatternInternal # Pattern Random access adjustment mode selection menu Picture TuningColor Balance Sync Fast/Slow Adjustment Clamp TuningPeaking Port 2 Video or S-Video Line Doubler optionColor Select Color Select Focusing Geometry Adjustments Horizontal Phase AdjustmentGeometry Geometry Raster Shift Adjustment Projected rasterCrt faceplate border Raster Shift Left-Right east-west Adjustments LEFT-RIGHT E-WLEFT-RIGHT Seagull correction Left Side CorrectionSeagull Correction Left Side Correction Top-Bottom north-south Adjustments TOP-BOTTOMTOP-BOTTOM N-S TOP-BOTTOM N-S Horizontal Size Adjustment Exit will return to Geometry Vertical Linearity Adjustment Vertical Size Adjustment Blanking Adjustments Top blanking Right blanking Bottom blanking Convergence Adjustment Convergence Starting up the Service mode Overview flowchart Service modeService Mode Copy Mode IdentificationCopy a block Graphics 808s Delete Mode Deletion of blocksDeleting block by block Deletion of all blocks Change password Change LanguageRun time Barcographics 808s Set to midposition Undo MidpositionConvergence Mid Undo Convergence Midposition Dynamic Astigmatism spot shape adjustment Dynamic AstigmatismDynamic Astigmatism G2 Adjust Gamma correctionsCRT run in cycle CRT Drive Mode Projector Warm UpProjector Warm UP Projector Warm UP MESSAGES, Warnings and Failure Codes Fh= 15.6 kHz Fv= 050 Hz003 Input not available I2C error Addr FH3 RWI commu Nication ErrorIris commu Nication Error Invalid RWI soft Version Options Magik Interface Ceiling Mount kit CM100 Orbiting KitLine Doubler Kit Adapter and communication cables Orbiting Mode Toggle Switches OrbitingOrbiting option Master/Slave Toggle Adjustment procedure Stand-Alone projector Orbiting Speed Toggle only in Master OrbitingOrbiting Alignment Adjustment procedure multiple projector installations Adjustment Blocks and Source Adjustment Blocks memory blocksSource numbers 90 Adjustment Blocks and Source Numbers Insert Card