Service Mode
The next baud rates are available :
-9600
-4800
-2400
-1200
-600
-300
-150
-75
The actual baud rate will be highlighted. To change the baud rate, push the control disk up or down and press ENTER to accept the new baud rate setting.
Reset Lamp Runtime
Reset lamp run time is only allowed when a new lamp is installed. Highlight Reset Lamp Run Time by pushing the control disk up or down and press ENTER to select.
When Reset Lamp Run Time is selected in the Service Mode selection menu, the following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the reset operation.
CHANGE BAUDRATE PC |
9600 |
4800 |
2400 |
1200 |
600 |
300 |
150 |
75 |
Select with or |
<ENTER> to accept |
<EXIT> to return. |
SERVICE
IDENTIFICATION
CHANGE
PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
PRESET INPUT BALANCE 
MORE ...
WARNING
RISK OF ELECTRICAL SHOCK
______________________________________________________________
LAMP RESET RUN TIME 
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
5975696BARCODATA2100140798 |
| |
| ||
|
|
|
