Service Mode
Preset Input Balance
Highlight the Black Balance by pushing the control disk up or down and press ENTER to select.
With the Black Balance adjustment, the black level of the red and blue channels can be adjusted in comparison with the green channel. Use the control disk by pushing forward or backward to change Red or by pushing to the right or to the left to change Blue.
Press EXIT to return to the Preset Input Balance menu.
Highligh the White Balance by pushing the control disk up or down and press ENTER to select.
With the White Balance adjustment, the gain of the red and blue channels can be adjusted in comparison with the green channel. (To adjust the gain of the complete video signal, use the contrast adjustment).
Use the control disk by pushing forward or backward to change Blue or by pushing to the right or to the left to change Red.
Press EXIT to return to the Preset Input Balance menu.
Depending the pixel frequency of the connected source, 3 different filters are selected : VIDEO, VGA, XGA or no filter (if Scale [1:1]] is selected in the geometry menu). For each of these filters, the Preset Input Balance settings are memorised separately. During the adjust- ment, the used filter is indicated.
SERVICE
IDENTIFICATION
CHANGE
PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
PRESET INPUT BALANCE 
MORE ...
PRESET
INPUT BALANCE
FILTER : XGA
BLACK BALANCE
WHITE BALANCE
Select with or
then <ENTER>
adjust red with or ,
blue with or <EXIT> to return.
5975696BARCODATA2100140798 |
| |
| ||
|
|
|
