Installation Set Up
To change the Configuration, enter the adjustment mode by pushing ADJUST or ENTER. Highlight Installation by pushing the control disk up or down and press ENTER to select. The installation menu will be displayed.
ENTER displays the Installation menu.
EXIT returns to operational mode.
Highlight Configuration by pushing the control disk up or down and press ENTER to select. The configuration menu will be displayed.
ENTER displays the Configuration menu.
EXIT returns to the path selection menu.
ADJUST retuns to operational mode.
The actual selected configuration will be highlighted.
Push the control disk up or down to select the corresponding configuration with regard to the projector environment. Press ENTER to confirm your selection.
ENTER to confirm the selection.
EXIT returns to the installation menu.
ADJUST retuns to operational mode.
5975696BARCODATA2100140798
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01 Select with or then <ENTER> <EXIT> to return.
INSTALLATION |
CONFIGURATION |
INTERNAL PATTERNS |
Select with or |
then <ENTER> |
<EXIT> to return. |
CONFIGURATION |
FRONT/TABLE |
FRONT/CEILING |
REAR/TABLE |
REAR/CEILING |
Select with or |
then <ENTER> |
<EXIT> to return. |
