Random Access Adjustment Mode
File Service
Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When there is a little difference, the file can also be loaded and than edited until the source specs are reached.
File annotation :
xxxxxxxx.xxx x xxxxXxxxxi
i or blank : i = interlaced, blank = not interlaced
xxxxXxxxx : active pixel rating
x : source number
xxx: file extension, first character is C (for custom made files) or S (for standard files).
The second and third character is used for a following number (=file index)
file index for custom files : 00 to 63.
xxxxxxxx: base name, 8 characters.
Highlight File Service by pushing the control disk up or down and press ENTER to select. The File service menu will be displayed.
ENTER displays the File Service menu;
EXIT returns to the Path selection menu.
ADJUST returns to operational mode.
The following file manupulations are possible :
-Load : installation of a file for a new source.
-Edit : editing a loaded file to the source specs.
-Rename : renaming a file.
-Copy : copying a file to a new file.
-Delete : deleting an existing file.
-Options : way of displaying the file annotation and sort possibilities.
5975696BARCODATA2100140798
RANDOM ACCESS | ||
ADJUSTMENT MODE | ||
FILE SERVICE | ||
PICTURE TUNING | ||
AUDIO TUNING | ||
GEOMETRY |
| |
Select with | or | |
then | FILE SERVICE | |
<EXIT> | ||
| ||
| LOAD | |
| EDIT | |
| RENAME | |
| COPY | |
| DELETE | |
| OPTIONS | |
| Select with or | |
| then <ENTER> | |
| <EXIT> to return. | |
| ||
