Connections
Connecting a RCVDS 800 or RCVDS 05 to the BARCODATA 2100.
Connecting an IR Remote Receiver 800 to the BARCODATA 2100.
-Up to 10 inputs with one RCVDS800 or 20 inputs with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module.
-Serial communication with the projector.
-Remote control buttons on the RCVDS to control the BARCODATA 2100 (source selection and analog settings).
-The selected source number will be displayed on a 2 digit display and the selected input module will be indicated with a LED on the rear.
For more information about the use of :
the RCVDS 800, consult the owner's manual, order number : R5975004.
the RCVDS 05, consult the owner's manual, order number : R5975765.
Connecting a VS05 to the BARCODATA 2100.
This infrared red receiver unit makes it possible to control the BARCODATA 2100 from another room.
There is a communication line cable between the IR receiver and the projector or the RCVDS. The control information from the RCU can now be sent to the IR Remote Receiver 800.
The IR Remote Receiver 800 displays the selected source on a 7- segment display.
Order number : R9827515.
Communication cable
IR Remote Receiver 800
Screen | BARCODATA 2100 |
The VS05 can switch up to 5 Composite Video sources, 3 Super Video sources and 1 RGB analog or component video source to the BARCODATA 2100. In addition, the audio signal proper to the source, can be switched to an audio amplifier.
Order number : R9827890
For more information about the use of the VS05, consult the VS05 owner's manual, BARCO order number : R5975245.
Projection room | Control room |
| 5975696BARCODATA2100140798 | |
| ||
|
|
|
|
|
|
