Random Access Adjustment Mode
Select "Vertical" by pushing the control disk key up or down and press ENTER. The full image is displayed.
The "Vertical Total lines" are already filled when an active file is selected to be edited.
The "Active lines" : number of horizontal lines determining the height of the projected image. This value is normally given in the specification of the source. If not, adjust until full image height is displayed (no missing lines)
Vertical shift : shift the image up and down (push control disk up or down) on the screen until the correct image position is obtained.
When changing the vertical shift setting in the 'Edit' menu, the vertical shift and vertical size settings in 'geometry' are reseted.
Interlaced [On] or [Off] : this selection is automatically filled when active file has to be edited. If the image is wrong due to mismeasurement, use the ENTER key to toggle between [On] and [Off]. (for interlaced images, 1 frame contains 2 fields).
Read AMDS
AMDS = automatic mode detection & synchronisation
During the installation of a file with LOAD, the system automatically measured the horizontal period, the total vertical lines and the interlaced mode.
When selecting Read AMDS, the system remeasures the above indicated items.
864 |
| 5975696BARCODATA2100140798 | |
| ||
|
|
|
|
|
|
