Service Mode
Change Language
Highlight Language by pushing the control disk up or down and press ENTER to select the Language Selection menu.
For the moment, only English is available.
ENTER displays the Change Language menu.
EXIT returns to the adjustment selection menu.
SERVICE
CHANGE LANGUAGE 75 Ω TERMINATION DIMMING
I2C DIAGNOSIS
MORE ...
CHANGE LANGUAGE
ENGLISH
Select with or
then <ENTER>
<EXIT> to return.
75 W Termination
The RGB inputs (source 4 and source 5) can be terminated on 75 Ω . Highlight '75 Ω Termination' by pushing the control disk up or down and press ENTER to display the 75 Ω termination menu.
Select the corresponding input by pushing the control disk up or down and press ENTER to toggle between [ON] or [OFF].
Note : when there is no loop through connection, the inputs have to be terminated on 75 Ω .
12-12
SERVICE |
CHANGE LANGUAGE |
75 W TERMINATION |
DIMMING |
I2C DIAGNOSIS |
MORE ... |
75 W TERMINATION |
RGB SOURCE 4 [ON] |
RGB SOURCE 5 [ON] |
Select with or |
then <ENTER> |
<EXIT> to return. |
5975696BARCODATA2100140798 |
