Barco R9001070 owner manual Level sync

Location and Functions of Control

1

Power switch : '1' = on, '0' = off

Power input : switchable between 120 VAC and

AUDIO IN : 3 audio inputs on 2 Cinch (RCA) connectors

10	for audio (L-R).
	MUTE LED : lit up when mute key is pressed.

2230 VAC

IR receiver : receiver for control signals transmitted from

3the RCU.

Diagnostics code : a) source number

4b) error code : a two digit error code is displayed when something goes wrong inside the projector.

5	Source 5 : RGB H/C V input : RGB analog input with
	standard sync on 5 BNC connectors. The sync can be
	sync on green, composite sync, separate sync (H & V) or
	3 level sync.
6	Source 4 : RGB H/C V input : RGB analog input with
	standard sync on 5 BNC connectors. The sync can be
	sync on green, composite sync or separate sync (H & V)
7	Source 1 : Video input (composite video) on BNC
	connector. Allows a video tape recorder, video camera,
	color receiver/monitor, etc. having a video line output to be
	connected to the projector.
8	Source 2 : Video input on Cinch (RCA) connector.
	Allows a video tape recorder, video camera, color re-
	ceiver/monitor, etc. having a video line output to be
	connected to the projector.
9	Source 3 : S-Video on 4-pin mini-DIN connector. Sepa-
	rate Y/C (luma-chroma) signal inputs for higher quality

playback of Super VHS signals.

11
12	AUDIO OUT : 2 x Cinch (RCA) stereo audio output.

13	Projector mode indication : indicates the status of
	the projector.
	no light : power switch is not pressed.
	red light : power switch is pressed, projector in
	stand by mode.
	green light : projector in operational mode.
14	IR-Acknowledged : (green LED) IR signals are rec-
	ognized.
	IR-Received : (red LED) IR signals are received without
	knowing for which projector.
15	RS232 IN : to allow communication with external com-
	puter, e.g. IBM PC or compatible, Macintosh ...

RS232 OUT : used to connect to next projector, RS232IN

16plug (communication link for PC or MAC to the next projector).

17Communication port : allows communication with the 800 peripherals.

18CTRL : remote input for wired remote control.

5975696BARCODATA2100140798 5-3