Unpacking & Dimensions
Unpacking
To open the banding, pull on the clip as shown in the first drawing.
Take the projector out of its shipping carton and place it on a table.
For transportation, the projector is mounted on a wooden board with 3 bolts (M5). Use a 8 mm wrench to remove these bolts.
When using the projector as a table mounted configuration, always mount the 3 plastic supporting feet by turning in into the provided holes (see drawing on next page).
Save the original shipping carton and packing material, they will come in handy if you ever have to ship your projector. For maximum protection, repack your projector as it was originally packed at the factory.
Pull
To open
Contents of the shipped box : | 1 | 2 | 3 | 4 | 5 |
|
-1 BARCODATA 2100
-1 remote control unit RCU + 1 9V battery
-1 power cable with outlet plug type CEE7 or ANSI 73.11.
-1 owner’s manual.
-1 installation manual.
-3 plastic supporting feet.
-2 supporting feet extensions for 100%
|
| |
| 5975696BARCODATA2100140798 | |
| ||
|
|
|
|
|
|
