Optional Equipment
Interface
Universal Analog Interface
Order number : R9826100
RGB 120 MHz Analog Interface
Order number : R9826570
VGA interface
Order number : R9828070 (230V)
R9828079 (120V)
MAC interface
Order number : R9828050 (230V)
R9828059 (120V)
Multifunctional Analog Graphics Interface Kit (MAGIK) Order numbers MAGIK with cables and case :
R9828120 (230V)
R9828129 (120V) Order number MAGIK only :
R9828121 (230V)
R9828128 (120V)
Adapter and Communication Cables
BARCO provides several cables to connect peripheral equipment to the BARCODATA 2100.
a. D9-D9 communication cable
-To connect an IBM PC (or compatible) to the projector.
-To connect a RCVDS 800/RCVDS 05 to the projector.
-To connect a IR receiver to the RCVDS or to the projector.
-To be used as extension cable for all other adapter cables. Available length :5 m (16ft), order number R982770; 15 m(50ft), order number R9827640; and 30 m (100ft), order number R9827570
b. Din Mini8-D9 adapter cable.
-To connect a Macintosh computer to the projector. Available length : 1 m, order number R9827640.
c.
-To connect a workstation to the projector. Available lenght : 1 m, order number R9827630
d. 5 BNC to 5 BNC cable
-To connect an analogue source to the BNC input of the projector. Available lenght : 60 cm, order number R9828260
150 cm, order number R9828261
5 m, order number R9828262
15 m, order number R9828263
Ceiling Mount Kit CM50
This ceiling mount with or without pulley system enables to mount the projector to the ceiling. The concept makes it possible to adapt the projector perfectly to the local mounting requirements in a safe and solid manner. The ceiling mount is specifically developed for rooms with a lowered ceiling, but can be used in other rooms as well by omitting the upper plate and the four screwed rods.
The CM50 has to be used in combination with an adaptor plate. Order number CM50 without pulley : R9827990
Order number CM50 with pulley : R9829991
Order number adaptor plate : R9829450
| 5975696BARCODATA2100140798 | |
| ||
|
|
|
|
|
|
