Power Connection
Power (Mains) Cord Connection
Use the delivered power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the front of the projector.
The power voltage for the projector is indicated on the identification plate on the rear of the projector.
The projector input voltage is internally switchable between 230 Vac and 120Vac. Consult a qualified service technician to adapt the input voltage to the correct voltage on the wall outlet.
This projector may be connected to an
Fuses
Warning
For continued protection against fire hazard :
-replace with the same type of fuse.
-refer replacement to qualified service personnel
Fuse type : T16 AH/125V | Order no. : B370076 |
Switching ON
Use the power switch to switch on.
When '0' is visible, the projector is switched off.
When '1' is visible, the projector is switched on.
SOURCE 5 
SOURCE 4 
SOURCE 1
RGBH/CV RGBH/CV VIDEO
| R | R |
|
| G | G | SOURCE 2 |
|
|
| VIDEO |
| B | B |
|
IR | H/C | H/C | SOURCE 3 |
|
|
| S VIDEO |
| V | V |
|
AUDIO OUT
AUDIO IN C
AUDIO IN B 
AUDIO IN A
L - R | L - R | L - R | L - R |
|
| Read instructions before | hardwired | |||||
|
| connecting peripherals |
| remote | ||||
RS 232 IN |
| RS 232 OUT |
| COMM PORT |
|
| CTRL |
|
0 | I |
|
|
|
| AUDIO OUT | AUDIO IN C | AUDIO IN B | AUDIO IN A |
| L - R L - R L - R L - R | |||
| 0 I |
|
|
|
| 5975696BARCODATA2100140798 | |
| ||
|
|
|
|
|
|
