Location and Functions of Control
Terminology
Back light key : when activated, all keys will lit up and
1visible in the dark.
2ADJ. : ADJUST key, to enter the adjustment mode or for quick exit in the adjustment mode.
Address key (sunk key), to enter the address of the
3projector (between 0 and 9). Press the recessed address key with a pencil, followed by pressing one digit button between 0 and 9.
4STBY : stand by button - to start projection when the power switch is switched on.
-to switch off the projector with- out switching off the power switch.
5PAUSE : to stop projection for a short time, press 'PAUSE'. The image disappears but full power is retained for imme- diate restarting.
6
MUTE : to interrupt the sound reproduction.
10
11
12
13
14
15
PHASE : used to remove instability of the image.
TEXT : when adjusting one of the image, e.g. controls during a meeting, the displayed bar scale can be removed by pressing 'TEXT' key first. To
FREEZ : press to freeze the projected image.
ENTER : to start up the adjustment mode or to confirm an adjustment or selection in the adjustment mode.
EXIT : to leave the adjustment mode or to scroll upwards when in the adjustment mode.
Control Disk : To make menu selections when in the adjustment mode. Also allows to increment or decrement an adjustment in the adjustment mode.
Control Disk Up = up arrow in the menus Control Disk Down = down arrow in the menus
Control Disk to the Right = arrow to the right on the menus Control Disk to the Left = arrow to the left on the menus
7Digit buttons : direct input selection.
Sound controls : use these buttons to obtainthe desired
8sound reproduction (see also 'Controlling').
RC operating indication : lights up when a button on the
16remote control is pressed. (This is a visual indicator to check the operation of the remote control)
Picture controls : use these buttons to obtain the desired
9picture analog level (see also 'Controlling').
|
| |
| 5975696BARCODATA2100140798 | |
| ||
|
|
|
|
|
|
