Blodgett MT3855G-G manual Installation, Oven Assembly, Folding Conveyor

Installation

Oven Assembly

FOLDING CONVEYOR

The folding conveyor assembly must be installed from the control box side of the oven.

1.Unfold the right side of the conveyor.

2.Push the conveyor into the support tracks. See Figure 6. Be careful to avoid hitting the red emergency off switch on the side of the control box.

3.Unfold the left side of the conveyor and contin- ue to push into the support tracks.

4.Insert the conveyor in beyond the normal rest- ing position.

5.Install the drive chain around the drive motor sprocket and the conveyor sprocket. See Figure 7.

NOTE: Figure 7 shown without chain guard and control box cover for clarity.

6.Pull the conveyor back out of the oven until the 1/4-20 thumb screw can be installed through the conveyor support and into the control box. See Figure 8.

NOTE: If the mounting hole cannot be lined up or the chain is too loose, the drive motor will need to be repositioned.

Figure 7

Figure 8

Figure 6

8